Connect2Go Dealer Supervision of UNO or EVL
Connect2Go supervises UNO and EVL and will generate a report to the dealer automatically indicating unit(s) that go offline for a period of time. Additionally if the end user has alerts set up for supervision in their app, they will also receive notification.
Example of dealer report:
Related Articles
UNO Hybrid Alarm FAQ
UNO Hybrid Alarm FAQ from our recent UNO launch webinar Q: Can we expect the UNO panel to be seen exactly as if it was an Envisalink 4, so that HomeAutomation integrators can use the same drivers in their Home Automation platforms? A: UNO shares the ...
UNO Hybrid Expansion Options using Eyezon/Connect2Go and DSC
The new UNO hybrid alarm, AKA UNO864 or UNO-CG or UNO-IP - all the same board - can accept a huge range of wired and wireless expansion. Here are the general guidelines for wired and wireless zone expansion using DSC, SOLO and UNO expanders / ...
Update / Upgrade UNO Touch Screen Keypad
The UNO touch screen keypad software has gone through many updates as it matures. It's recommended to update to the most current version of the touchscreen app by following the process indicated in their installation guide. It is also copied below: ...
Envisalink EVL-3 and EVL-4 Programming for Honeywell Vista Systems
Vista-10P/15P/20P/21IP Programming It is important that you create your EyezOn account and activate the module on the account before you connect it to the panel. Overview The EnvisaLink module will self-configure to work with the Vista panel once ...
Connect 120V wired smoke detectors to security alarm system like DSC, Vista, Concord
We are often asked how to add 120V wired smoke detectors to a low voltage security alarm system like DSC, Vista, Concord or Elk. First we need to point out that smoke detectors are a life safety product and so it's critical that you read and ...