Dicon American Sensors 330L Replacement
Dicon (American Sensors) 330L has been discontinued with no direct wire replacement. You can replace your 330L (in Canada) with 9120A or 9120BA from BRK which is made by the same factory and is cross listed as compatible.. You should replace all the detectors at the same time if they are over 10 years old. Please read the following page for further information.
http://www.aartech.ca/page/cos2010-sa360
Related Articles
American Sensors SA360, SA379, COS2010, 330L Replacements
Builders across Canada have been installing American Sensors smoke detectors and combination Smoke/CO detectors for decades. However these models and the American Sensors brand have been discontinued. In replacement there are BRK models ...
Replacement for Dicon American Sensors ESA5011 120V Smoke Detector with Relay
Hello, The ESA5011 was a 120V hard wired smoke detector with a built-in relay output. This model has been discontinued with no replacement, however we have information on what may be used to replace it on our site here: ...
Replacement for ASD100 , ASD200 , 330SR 12/24V
The American Sensors / Dicon models ASD100, ASD200 and 330SR low voltage smoke detectors were discontinued by the manufacturer many years ago and they did not launch replacement models. As an alternative we suggest System Sensor 2012J which is a 4 ...
If I replace my smoke detector do I need to replace the bracket and wires?
In most cases, the mounting bracket and wires used to connect a smoke detector to the ceiling and power, are proprietary to the brand or model so you'll need to replace the mounting bracket and the wire harness (plug). The good news is that both are ...
Using a Smart Home Hub like SmartThings, Ezlo, Hubitat, Hometroller for Security
Smart hubs like Smartthings are great in general. They are not true security systems but they can often be made to function similarly to a security system with an arm/disarm function and push or text or email alerts if a "zone" is breached. . For ...