DSC PK5501 / RFK5501 Show Open Zones

DSC PK5501 / RFK5501 Show Open Zones

If you wish to have the DSC PK5501 / RFK5501 keypad show open zones automatically, turn on Option 8 in section 076 of Keypad Programming.

*8 Installer's Code * 076 8 ##

    • Related Articles

    • DSC Neo HS2016 HS2032 HS2064 Manual

      See attached files for DSC Neo Installation manual and reference manual for HS2016 H2032 HS2064 alarm systems.

    • Procedure for converting DSC 6 digit serial numbers to 5 digit serial numbers

      The 1st digit of ESN number is also 1st digit of SN Open up calculator in Microsoft Windows Click on VIEW at top of calculator and select SCIENTIFIC (or PROGRAMMING in Vista or Win 7 Click on HEX button at top left of calculator Input the 2nd, 3rd ...

    • DSC PowerSeries NEO Ecosystem

      The DSC PowerSeries NEO ecosystem is a hybrid intrusion alarm platform designed to bridge traditional hardwired security systems with modern encrypted wireless technology. Positioned between legacy PowerSeries panels and fully wireless platforms, NEO ...

    • DSC Powerseries PC1616/PC1832/PC1864 EOL Resistors vs Closed Loop Programming

      By default, DSC Powerseries wired panels are expecting each zone to have EOL resistors installed.  If you are not going to use EOL resitors, you will need to turn Section 013 Option 1 to ON otherwise your zones will show open.  After you exit ...

    • UNO Hybrid Expansion Options using Eyezon/Connect2Go and DSC

      The new UNO hybrid alarm, AKA UNO864 or UNO-CG or UNO-IP - all the same board - can accept a huge range of wired and wireless expansion. Here are the general guidelines for wired and wireless zone expansion using DSC, SOLO and UNO expanders / ...