DSC RM-1 Wiring

DSC RM-1 Wiring

As of the time of writing (Aug 27th 2010) the RM-1 wiring is as follows:

Black - negative coil
Red - positive coil

White - common
Yellow - normally closed
Green - Normally Open

    • Related Articles

    • Add existing wired smoke detectors to a DSC alarm system

      We are often asked how to add existing smoke detectors to a DSC alarm system. There are 3 options we can suggest: Install DSC wireless smoke detectors separately so they don't interfere with your current system. This has the benefit of having each ...
    • Wiring DSC SS102 Shock Sensor

      The manual can be a bit confusing.. for basic operation: Terminal 1 - 12VDC Power + Terminal 2    Power Negative Terminals 3 and 4 are NC to zone input
    • Insteon with Aluminum Wiring

      Aluminum wiring is less conductive then copper so the INSTEON signal may be slightly affected by that but the signal can go a long way on the powerline so the aluminum wiring does not have a major effect in a residential home.  Where it can be ...
    • Procedure for converting DSC 6 digit serial numbers to 5 digit serial numbers

      The 1st digit of ESN number is also 1st digit of SN Open up calculator in Microsoft Windows Click on VIEW at top of calculator and select SCIENTIFIC (or PROGRAMMING in Vista or Win 7 Click on HEX button at top left of calculator Input the 2nd, 3rd ...
    • Ring Video Doorbell Pro Wiring Diagrams

      The following page shows a number of different example wiring diagrams specifically for the Ring Video Doorbell Pro https://support.ring.com/hc/en-us/articles/360022454432-Wiring-Diagrams-for-Ring-Video-Doorbell-Pro-Setup