Econet EVB105 Valve Pairing

Econet EVB105 Valve Pairing

The Econet EVB105 ZWave Motor for controlling water valves, can be paired with most Zwave primary controllers including Vera, Wink, SmartThings, Fibaro and Zipato.

 

  1. plug in the valve motor
  2. place the primary controller in to include mode
  3. Press the set (power) button on the motor 3-4 times very quickly
  4. The primary controller should indicate it is pairing the device
  5. If this fails, some controllers like Vera will have you 'try again'.  You can also try to put the primary controller in to 'uninclude' mode and press the power/set button on the motor 3-4 times quickly.  Then try again from step 2.

    • Related Articles

    • Econet Zwave Valve EBV105 Installation and Troubleshooting

      The EBV105-UMK is meant to work with standard ball valves in 1/2", 3/4" and 1" sizes.  It has plenty of torque but it's crucial that the valve is free moving and that the motor and mounts are lined up properly.  If you move the water valve by hand ...

    • Connecting ELV-WSV2 Water Valve To Alarm Zone For Valve Status

      The ELK-WSV2 shut-off valve is a heavy duty motorized water valve.  It also has a manual valve open/close lever.  For a number of reasons, it's important to know whether the valve is open or closed.  For example if it is moved manually, or to confirm ...

    • Factory Reset Inovelli VZM31 Blue Zigbee Switch

      Many issues with initial installation or pairing can be resolved with a factory reset. To factory reset your Blue Series 2-1 Switch (VZM31-SN), hold down on the top of the paddle and the config / favorites button for 20 seconds until the LED Bar ...

    • Inovelli Multi-Way Switch Installation Guide

      Inovelli smart switches can be used in both 3-way and 4-way setups to control a single load from multiple locations, with the preferred method pairing a primary smart switch with one or more AUX01 add-on switches for full feature support like dimming ...

    • How to Reset Hubitat C-8 Pro: Step-by-Step Guide

      Performing a Soft Reset A soft reset clears the hub’s main database, which includes your settings, device list, custom code, and other configurations. It does not affect the Z-Wave or Zigbee radios. Generally, it is a safe procedure, and if you ...