Factory Reset Inovelli VZM31 Blue Zigbee Switch

Factory Reset Inovelli VZM31 Blue Zigbee Switch

Many issues with initial installation or pairing can be resolved with a factory reset.  
​
To factory reset your Blue Series 2-1 Switch (VZM31-SN), hold down on the top of the paddle and the config / favorites button for 20 seconds until the LED Bar turns red and let go.

Video guide here:

    • Related Articles

    • How to factory reset the Hubitat-C7 Z-wave hub

      Be aware that factory/full resetting will do the following:  "Zigbee and Z-Wave radios will be reset. All files on the hub will be deleted and if a restore from backup is attempted, Zigbee and Z-Wave devices will not work anymore without reset and ...

    • How to Reset Hubitat C-8 Pro: Step-by-Step Guide

      Performing a Soft Reset A soft reset clears the hub’s main database, which includes your settings, device list, custom code, and other configurations. It does not affect the Z-Wave or Zigbee radios. Generally, it is a safe procedure, and if you ...

    • Factory Reset DSC PC1616 / PC1832 / PC1864

      If you have lost or forgotten your installer code for Powerseries (PC1616/PC1832/PC1864) and need to make changes to the system programming you will need to factory reset the panel which will remove/reset ALL programming and should also reset the ...

    • Reset Hikvision Password

      If you are the owner of a Hikvision DVR or NVR and forgot your password, you will need to have your password reset, you can use this form for Canadian customers: https://www.hikvision.com/ca-en/support/password-reset/ You will also need to have ...

    • Factory Reset SC1200

      Hold CLEAR until you see HOME CONTROL, then press 7 then 9 then ON then CLEAR. This will reset the PIN to 0000, but retain all other settings.