The factory reset process for ZOOZ Smart Plugs is the same for the following models: ZEN04, ZEN05, and ZEN14.
If your Smart Plug is unresponsive to both Z-Wave and manual commands, a factory reset may resolve the issue. Please note that a factory reset will restore the plug to its default settings and erase any customized settings and recorded activity.
First, make sure the Smart Plug is powered on, then follow the steps below:
- Press the Z-Wave button twice.
- Press and hold the Z-Wave button a third time for 10–20 seconds.
- The LED indicator will flash green three times to confirm that the factory reset was successful.
Once the factory reset has been completed, try adding the Smart Plug back to your Z-Wave system. This will allow you to confirm whether the reset resolved the issue and restored normal communication with your Z-Wave controller. If the Smart Plug can be successfully included and responds to commands as expected, the factory reset has likely resolved the problem. If the issue persists after resetting and re-including the device, further troubleshooting may be required.