Hubitat Device Compatibility and Documentation
Please review Hubitat's compatibility list here:
Most typical zwave certified devices (eg. wall dimmers or switches) should work. More unique devices like multi sensors that incorporate multiple functions in to one device, or that use special command classes may require a driver.
Additionally their documentation and forums are a wealth of information and highly recommended:
Related Articles
Homeseer WX300 Support in Hubitat
While the WX300 switch/dimmer from Homeseer should "work" out of the box as a generic device, in order to take advantage of more features a driver will be required. At time of writing, there is a community driver now available: ...
How to factory reset the Hubitat-C7 Z-wave hub
Be aware that factory/full resetting will do the following: "Zigbee and Z-Wave radios will be reset. All files on the hub will be deleted and if a restore from backup is attempted, Zigbee and Z-Wave devices will not work anymore without reset and ...
Elk M1 Gold to Hubitat Integration
There is community written code written for Hubitat that allows it to communicate with an Elk M1 Gold with M1XEP Ethernet interface installed. The integration allows Hubitat to "see" arming state, zones, outputs, keypads. It also allows Hubitat to ...
Vera Edge and VeraPlus Device Compatibility
VeraEdge and VeraPlus support practically all Zwave certified devices. Some complex Zwave devices like multi-sensors and those that require other 'tweaking' through Zwave options and settings may require some assistance from Vera support. VeraEdge ...
Remote Management of Door Lock Codes with Hubitat
Hubitat users can add or remove PIN codes for door locks using the web interface. For remote management of lock codes, we recommend the optional (paid) Remote Admin Service. Advanced users may wish to set up a vpn for remote access to their Hubitat ...