Related Articles
Factory Reset Inovelli VZM31 Blue Zigbee Switch
Many issues with initial installation or pairing can be resolved with a factory reset. To factory reset your Blue Series 2-1 Switch (VZM31-SN), hold down on the top of the paddle and the config / favorites button for 20 seconds until the LED Bar ...
Inovelli status bar blinking red
When the LED Bar is blinking red, it means the load attached to the light is too small in a non-neutral setting. In other words, if you are not using a neutral wire, you need to have your load (light) be at least 25W (NOTE: Not a 25W equivalent, but ...
Spot Protect SMS/MMS Credits
Some wireless carriers (including AT&T, T-Mobile, Verizon, and others) operate with a filter that uses the SORBS list. The filter affects services that use email-to-SMS gateways (the free External Delivery uses your carrier’s email-to-SMS gateways). ...
SmartThings Edge Drivers
SmartThings allows you to manage your smart home from a single app - but to ensure optimal performance, speed, and compatibility, installing the right Edge Driver is essential. Edge Drivers enable local control, unlock advanced features, and are ...
How to Insert microSD Card in Foscam FI9853EP
The FI9853EP has an on board microSD card slot that can accept up to 32GB cards for local on-camera recording. In order to install the microSD card, power down the camera and remove the main dome from the base and mount. Then firmly twist the dome ...