Inovelli Multi-Way Switch Installation Guide

Inovelli Multi-Way Switch Installation Guide

Inovelli smart switches can be used in both 3-way and 4-way setups to control a single load from multiple locations, with the preferred method pairing a primary smart switch with one or more AUX01 add-on switches for full feature support like dimming and multi-tap. Traditional dumb switches can also be used for basic on/off control, and multiple smart switches are technically possible but require more complex wiring and hub automation. The following sections outline each method, and compatibility, to help you choose the best setup for your installation.



Multi-Way w/Auxiliary Switch
The AUX01 add-on switch matches the Inovelli smart switch aesthetics, supports dimming or fan speed control at both ends, works in non-neutral setups, allows multi-tap scene control on switches made from 2021 onward, can operate in Smart Bulb Mode, and is a more affordable option than adding another smart switch.

Multi-Way w/Dumb Switch
Using a standard dumb switch is less expensive than buying an AUX or another smart switch, but it won’t match the smart switch aesthetically, cannot be used in non-neutral setups or with illuminated switches, only allows basic on/off control without dimming, and does not support Smart Bulb Mode.

Multi-Way w/2x Smart Switches
Using multiple smart switches allows dimming or fan speed control at both ends, supports multi-tap scene control, Smart Bulb Mode, and Animated Notifications (on compatible switches), but cannot be used in non-neutral setups and requires a hub that supports Direct Association, Direct Binding, or multi-tap scene control.

Multi-Way Compatibility Table
Model Number
Works w/Dumb Switch
Works w/Aux Switch
Works w/2x Smart Switches
Wiring Guide
VZM31-SN
Yes
Yes
Yes
VZM35-SN
No
Yes
Yes
Blue Series Fan Switch
VZM30-SN
No
Yes
Yes
VZM32-SN
No
Yes
Yes
VZW31-SN
Yes
Yes
Yes
VZW32-SN
No
Yes
Yes
VTM30-SN
No
Yes
Yes
VTM31-SN
Yes
Yes
Yes
VTM35-SN
No
Yes
Yes
White Series Fan Switch


    • Related Articles

    • Aeotec SmartThings Smart Home Hub vs Smart Home Hub 2: Comparison Guide

      Aeotec Smart Home Hub (GP-AEOHUBV3US) The Aeotec SmartThings Smart Home Hub integrates a variety of smart devices through the SmartThings ecosystem, supporting Z-Wave, Zigbee 3.0, Wi-Fi, Matter and Thread. It serves as the central hub for managing ...

    • Factory Reset Inovelli VZM31 Blue Zigbee Switch

      Many issues with initial installation or pairing can be resolved with a factory reset. To factory reset your Blue Series 2-1 Switch (VZM31-SN), hold down on the top of the paddle and the config / favorites button for 20 seconds until the LED Bar ...

    • Insteon Dimmer Compatibility with LED Lights

      LED lights are great for saving energy compared to their older incandescent counterparts.  However, being able to dim LED lights has proven to be challenging.  Where incandescent lights had nothing more than a filament inside (piece of wire that ...

    • DSC Neo HS2016 HS2032 HS2064 Manual

      See attached files for DSC Neo Installation manual and reference manual for HS2016 H2032 HS2064 alarm systems.

    • Troubleshooting Zwave Lock Installation

      Zwave locks are one of the most finicky Zwave devices to enroll in to an automation system because they use Zwave security transmission and initially create a large amount of 'data' back and forth while the lock is being enrolled.  Here are some ...