Manual Port Forwarding For Uniview NVR Browser Access Without UPNP

Manual Port Forwarding For Uniview NVR Browser Access Without UPNP

Normally Uniview NVRs are remotely accessed via the cloud using a smart phone app.  This doesn't require port forwarding.  However remote web browser access does require certain ports to be forwarded.  If you have UPNP turned on in your router, the ports should automatically forward.  If this doesn't work or you don't have UPNP enabled, please make sure the following ports are forwarded through your router, to the IP address of your NVR.  You should also make sure your NVR has been assigned a static IP internally.

 

SDK port 6060
Media port 7070
HTTP port 80
HTTPS port 443
RTSP port 554

These are the default ports so if it does not work please make sure they have not been changed.  Or if you find that prot 80 or 443 are blocked you may need to use a different port externally if your router allows it, or change the ports in your NVR setup.

    • Related Articles

    • Uniview NVR Browser Access

      Please refer to the attached document if you are having any difficulty accessing your Uniview NVR from a Windows or Mac browser.  Be sure to check the preferences on your browser and the firmware version of your Uniview NVR.  Please contact support ...

    • Port Forwarding Foscam MJPEG Cameras

      This guide discusses setting up 'port forwarding' to provide remote access to your Foscam MJPEG camera.  This includes models such as FI8918W, FI8910W, FI8905W and so on.  This does not include the megapixel cameras or P2P models.  Before you can set ...

    • DSC Neo HS2016 HS2032 HS2064 Manual

      See attached files for DSC Neo Installation manual and reference manual for HS2016 H2032 HS2064 alarm systems.

    • EyeoNet NVR Port Forwarding

      For EyeoNet NVRs remote access & DDNS/RTSP access please forward the following ports: Port: 37777 (The main port for everything. Must Open) Port: 37778 (UDP port) Port: 80 (Web login port) Port: 554 (RTSP port) Port: 12366 (DDNS port)

    • Connect Foscam VD1 via ONVIF to Uniview (or other) NVR

      The Foscam VD1 video doorbell works with its own P2P cloud app, and it can also work as an ONVIF camera with many/most NVR systems that support ONVIF.  In order to connect it to an NVR we recommend you give it a static DHCP reservation in your router ...