Remote Temperature Control and Monitoring

Remote Temperature Control and Monitoring


I have a cottage and want to be able to turn up the heat when I'm en-route and turn it back down when I'm not at the cottage.  Most of our Aube thermostats support a phone controller option so you
can call in, enter your password and turn the heat up on the way to the
cottaage and back down when you leave.  The 'away' temperature setting
is just enough to keep pipes from freezing.   Or you can take it one
step above and use the Freeze Alarm Deluxe with your Aube thermostat.
 The Freeze Alarm Deluxe can be used to set the home/away mode, and
will also call you if the temperature drops below the level you set or
if the power goes out, so you'll know if there's a problem requiring
your attention.

    • Related Articles

    • EVL4 Universal Monitoring and Control of DSC Neo and Other Security Alarm Systems

      Since DSC Powerseries was discontinued and replaced by Neo alarm system panels, we have been asked if the EVL4 card is compatible for self monitoring or pro monitoring through the EyezOn or Connect2Go service and apps. As of writing the EVL4 is not ...

    • Setting up Paxton Net2Online for Remote Management of Net2Plus

      Net2Online provides simple remote connection to manage Net2Plus systems by web browser or app over an Internet connection.  The building must have an available Internet connection and the Net2 Pro software must be current.   No port forwarding ...

    • Remote Management of Door Lock Codes with Hubitat

      Hubitat users can add or remove PIN codes for door locks using the web interface.  For remote management of lock codes, we recommend the optional (paid) Remote Admin Service.  Advanced users may wish to set up a vpn for remote access to their Hubitat ...

    • 2441TH Temperature Calibration

      Although the temperature readings from the factory are normally accurate, if you find your thermostat is not reading the correct ambient room temperature, please follow this guide or check the user manual. Make sure the hole in the wall through which ...

    • Using a MiniMote for Zwave Control and Adding an Automated Hub

      > Can I use a minimote controller to control a leviton light switch without a hub or bridge? > Would it continue to function if a added a samsung smartthings hub later? > The minimote can be used to create a new Zwave network so you can use it to ...