Setting Up Foscam Camera Remote Access On Bell 2Wire Modem

Setting Up Foscam Camera Remote Access On Bell 2Wire Modem

Quick-Guide To Setting Up Foscam Cameras For Remote Access On Bell 2Wire Modem
(Port Forwarding)

By default, your Bell router will be located at IP address 192.168.2.1
Open a web browser and type in 192.168.2.1 and click go

When you get to the router page, click on the SETTINGS tab then the FIREWIRE tab then the APPLICATION SUPPORT tab
At the bottom of the page click 'ADD NEW USER-DEFINED APPLICATION'
Then for Application profile name, enter: Foscam (leave Protocol: as TCP)
Port will be 8090 to 8090
Protocol timeout: will be TCP default 86400 seconds,
Application type: PPTP

Then click add to list.
After configuration is done refresh the Foscam page

    • Related Articles

    • Foscam camera display red/pink - How to fix

      If your Foscam camera is showing normal, well-lit footage with a pink or red hue it is usually due to the Infrared lights not turning off. Here are some steps you can take to correct this. 1) Manually turn on/off the IR lights a few times. (This can ...

    • Foscam IP Camera Search Tool for Windows and Mac

      See attached files for the Foscam IP Camera Search Tool for Windows and Mac.  Once the zip is downloaded, unzip it to extract the tool. See our retail Foscam Cameras and our Foscam Wholesale Distributor pages for products.

    • Troubleshooting Foscam DDNS Remote Access

      Foscam has discontinued their DDNS service as of December 31st 2020 so if you are/were using this service you'll have to find an alternate.  Please see this article for more information:   ...

    • Setting up Paxton Net2Online for Remote Management of Net2Plus

      Net2Online provides simple remote connection to manage Net2Plus systems by web browser or app over an Internet connection.  The building must have an available Internet connection and the Net2 Pro software must be current.   No port forwarding ...

    • Connect Foscam VD1 via ONVIF to Uniview (or other) NVR

      The Foscam VD1 video doorbell works with its own P2P cloud app, and it can also work as an ONVIF camera with many/most NVR systems that support ONVIF.  In order to connect it to an NVR we recommend you give it a static DHCP reservation in your router ...