The wireless part of RFK5501 is not being registered by the panel - never displayed 17 in section 903

• Related Articles

• Adding Wireless to the E27 and When to Use the Bus Versions of the Wireless Cards

  The AERF3 or AERF9 add wireless to the Elk Alarm Engine E27 panel. These wireless cards are available as bare cards that connect to the panel. Or as a bundle with a bus adapter. The Elk E27 Alarm Engine main panel can accept one RF Receiver directly, ...

• Enrolling DSC Wireless Sensors on RFK5500

    Note: Default installer code is 5555 1. Enter [ ✱ ][8][Installer Code][898]. The LCD displays the following: “Wireless Enrollment Mode.” 2. Place the wireless device in the desired location. 3. Activate the device as described in the associated ...

• Enrolling Wireless Sensors on DSC Systems Using RFK5501 Keypad

  How to enroll wireless devices into a DSC alarm system using a PK5501 or RFK5501 keypad by manually entering the device ESN. Enter [ ✱ ][8][Installer Code][804].   01 for Zone 1 02 Zone 2 and so on Enter in 6 digit ESN number then hit # twice Enter ...

• Enrolling Wireless Key Fobs To DSC RFK5500/RFK5501 Keypads

  Wireless keyfobs need to be enrolled in slots 41 through 56 with the first key in 41, second key in 42, etc. So to register the first key fob: *8 Installer's Code 804 41 XXXXXX   (the Electronic Serial Number of fob #1) ## If the fob does not ...

• Neo Panel Firmware V1.9 Upgrade Nov 2023

  Due to a firmware issue, DSC Neo panels including HS2016, HS2032, HS2064, HS2128 running V1.38 need to be updated to V1.39 as soon as possible. This will be done using a PCLINK-USB cable and DLS5 software. The attached documents outline the upgrade ...