UNO Hybrid Expansion Options using Eyezon/Connect2Go and DSC

UNO Hybrid Expansion Options using Eyezon/Connect2Go and DSC


The new UNO hybrid alarm, AKA UNO864 or UNO-CG or UNO-IP - all the same board - can accept a huge range of wired and wireless expansion.  Here are the general guidelines for wired and wireless zone expansion using DSC, SOLO and UNO expanders / keypads.

  • Supports PK5501, PK5500, RFK5501, RFK5500, LCD5511, PK5508 and some other DSC keypads
  • Supports DSC or UNO fobs if wireless receiver/keypad is installed
  • On board 8 wired zones
  • Expandable to 128 total zones
  • Max 3 x UNO8 supported for 32 wired zones.  UNO8 uses zones 9-32 as appropriate
  • UNO-RF433 supports up to 128 wireless zones - obviously we can't stomp on the wired expanders.
  • Max 7 x PC5108 so 64 wired zones, Zones 9-64.  If used with UNO8 then PC5108 must be Zones 33-64
  • DSC wireless max is based on whether it's an RFK keypad, RF5108, RF5133 receiver - and it's a DSC spec.
  • DSC wireless and SOLO wireless can co-exist using the correct receiverse
  • UNO8 and PC5108 boards may be mixed

NOTE: When using DSC Wireless and DSC Expanders same limitations as wilth a DSC Panel. Cannot put DSC Wireless and Hard wired Expander zones in the same blocks of 8





    • Related Articles

    • UNO Hybrid Alarm FAQ

      UNO Hybrid Alarm FAQ from our recent UNO launch webinar Q: Can we expect the UNO panel to be seen exactly as if it was an Envisalink 4, so that HomeAutomation integrators can use the same drivers in their Home Automation platforms? A: UNO shares the ...

    • Connect 120V wired smoke detectors to security alarm system like DSC, Vista, Concord

      We are often asked how to add 120V wired smoke detectors to a low voltage security alarm system like DSC, Vista, Concord or Elk. First we need to point out that smoke detectors are a life safety product and so it's critical that you read and ...

    • Connect2Go Dealer Supervision of UNO or EVL

      Connect2Go supervises UNO and EVL and will generate a report to the dealer automatically indicating unit(s) that go offline for a period of time. Additionally if the end user has alerts set up for supervision in their app, they will also receive ...

    • How to Add Photos to DSC Keypad HS2TCHPRO

      The DSC PowerSeries Pro Wired Touch Screen (HS2TCHPRO), compatible with PowerSeries Pro HS3032 and HS3128 alarm panels, includes a built-in digital picture frame feature. Using the SD card slot, you can easily update and customize the touchscreen ...

    • EVL4 Universal Communicator - Monitoring and Control of DSC Neo

      The EVL4 / EVL4-CG card is compatible for self monitoring or pro monitoring through the EyezOn or Connect2Go service and apps. As of writing the EVL4 is not bus compatible with the Neo panel but it by combining an EVL4 and UNO4 module, a "Universal ...