What Zwave Switches or Dimmers work with Alarm.com
Generally speaking, ZWave compatibility with Alarm.com is limited to basic Zwave devices like dimmers and switches although it is growing over time. Although Zwave is an open standard, Alarm.com has the ability to dictate which devices they will allow to be used with their system. Their current compatibility list is found here:
https://www.alarm.com/partners/hardware.aspx
We advise you stick with these devices or perhaps newer equivalents. You can also reach out to Alarm.com to ask if the device(s) you're considering are supported prior to making a purchase to avoid complications.
Related Articles
Zwave Dimmers and Switches Without Neutral Wire
Most Zwave dimmers and ALL Zwave on/off switches require a neutral connection (learn more). This is because Zwave products need a small amount of power to operate and this comes from the hot & neutral wires coming to the switch. If you have ...
EVL4 Universal Monitoring and Control of DSC Neo and Other Security Alarm Systems
Since DSC Powerseries was discontinued and replaced by Neo alarm system panels, we have been asked if the EVL4 card is compatible for self monitoring or pro monitoring through the EyezOn or Connect2Go service and apps. As of writing the EVL4 is not ...
Insteon Dimmers with LED Lights
The Insteon 2477D dimmer is officially rated for incandescent lighting only. However we've seen many people successfully use Insteon dimmers with LED lighting. The 2477D is a leading edge electronic dimmer. There are many LED bulbs that are sold as ...
Can I use ZWave sensors with Honeywell / Resideo ProA7plus Alarm
You can't use ZWave sensors with the ProA7Plus alarm system. It uses ZWave as an "output" to control devices such as ZWave light switches or water valves. Instead you'll want to use Honeywell PROSiX series sensors. You'll also need to ensure that you ...
INSTEON Switches or Dimmers in 3 Way and 4 Way Circuits
For a 3 way (2 switches) or 4 way (3 switches) circuit, you need to replace both/all switches with INSTEON switches. The master switch that controls the load can be a dimmer, relay switch or keypad. The remote switches(s) can be keypad or similar ...