WTK5504, WTK5504P Won't Enrol
If you're having issues enrolling a new WTK5504 or WTK5504P keypad in your DSC powerseries system, try a manual enrol:
On the keypad, after a power cycle, press both the minutes, and the seconds on the keypad at the same time.
This will force a manual enroll.
Related Articles
Leviton WIFI Switches and Dimmers, What if Internet Connection Goes Down
Q: Leviton's Decora Smart WIFI switches and dimmers use the Internet and Leviton's private cloud servers for set up and operation. What happens if the Internet connection in the house goes down? A: Switches will still work manually Timers will ...
Expanding Security Alarm System Power Supply
Wired Security systems (eg DSC, Elk) are powered by an external power supply, and then in turn they supply power to 12VDC peripherals such as keypads, zone expanders, motion sensors, glass breaks, smoke detectors. This auxiliary power from the panel ...
Programming Zone Labels on DSC PK5500 Alpha Keypads
The programming instructions for labelling zones on a PK5500 keypad are found in the keypad manual (not the main installation manual). They are a bit vague, so to summarize the sequence would be: *8 Installer's Code * 001 (for zone one, 002 for ...
Shelly Cloud Crestron Drivers
Shelly Cloud devices can work with Crestron systems by using drivers such as these from Wired Media Solutions: https://chdrivers.com/products/crestron-home-shelly-iot-driver Supported Shelly Modules Shelly 1 Shelly 1 PM Shelly 1 L Shelly 2.5 (When ...
Yale ZWave Installation and Instructional Videos
Visit Yale' https://www.yalehome.com/en/support/