ZWave Dimmer for LED Lights

ZWave Dimmer for LED Lights

 

If we are talking about screw in replacement LED bulbs available from a big box store, there is no guarantee from any vendor of any dimmer because there are too many variables. Certainly it has to be certified for dimming but they are not all created equal even within the same brand name or series.

However there is a 'low voltage electronic' dimmer from Leviton, part# VRE06-1LZ that is specifically designed for electronic low voltage loads like this. On paper, every other dimmer is for incandescent lighting.

If you want to be 100% safe, use an on/off switch instead without dimming and get a lower output bulb. 

Or for better compatibility, buy LED lighting that works with a 0-10V dimming driver. Then you could use (Insteon) ballast/led dimmer. Not Zwave but another option.

    • Related Articles

    • Insteon Dimmer Compatibility with LED Lights

      LED lights are great for saving energy compared to their older incandescent counterparts.  However, being able to dim LED lights has proven to be challenging.  Where incandescent lights had nothing more than a filament inside (piece of wire that ...

    • Insteon Dimmers with LED Lights

      The Insteon 2477D dimmer is officially rated for incandescent lighting only.  However we've seen many people successfully use Insteon dimmers with LED lighting.  The 2477D is a leading edge electronic dimmer. There are many LED bulbs that are sold as ...

    • LED lights glowing or flickering when module is turned off

      Some INSTEON products like LampLinc or OutletLinc Dimmer are designed for incandescent lighting, like a table lamp. They have have a feature called 'local load sense' that will allow a very small trickle current to pass through the outlet to SENSE if ...

    • Zwave Dimmers and Switches Without Neutral Wire

      Most Zwave dimmers and ALL Zwave on/off switches require a neutral connection (learn more).  This is because Zwave products need a small amount of power to operate and this comes from the hot & neutral wires coming to the switch.  If you have ...

    • Guide to LED and Audible Alerts on Your First Alert/BRK Smoke & CO Detector

      Smoke Detectors Model Normal Operation Alarm Condition Malfunction End of Life Low Battery 7010BA Steady Green. Flash Red. (1x every 5 min) Steady Green. Rapid Red. Audible Alarm. No LED. Horn: 3x No LED. Horn: 5x Flash Red. Horn: 1x 7020BSLA Steady ...