inovelli
Inovelli Multi-Way Switch Installation Guide
Inovelli smart switches can be used in both 3-way and 4-way setups to control a single load from multiple locations, with the preferred method pairing a primary smart switch with one or more AUX01 add-on switches for full feature support like dimming ...
Factory Reset Inovelli VZM31 Blue Zigbee Switch
Many issues with initial installation or pairing can be resolved with a factory reset. To factory reset your Blue Series 2-1 Switch (VZM31-SN), hold down on the top of the paddle and the config / favorites button for 20 seconds until the LED Bar ...
Inovelli status bar blinking red
When the LED Bar is blinking red, it means the load attached to the light is too small in a non-neutral setting. In other words, if you are not using a neutral wire, you need to have your load (light) be at least 25W (NOTE: Not a 25W equivalent, but ...
Inovelli Knowledge Base
Inovelli has developed an in-depth knowledgebase covering specifications, trouble shooting, configuration guidance and more. The knowledgebase may be found here.