Recent Articles
Paxton Net2 Plus Reset IP Address to DHCP
TCP/IP reset To reset a Net2 plus and return the unit to DHCP settings; Power down the Net2 plus unit Disconnect the reader on reader port 2 Link the Brown (Red LED) and Mauve (Media Detect) terminals on reader port 2 Power up the unit again and the ...
Uniview UNV Deactivating Grey Market Products in EZCloud
As of Friday, May 9, 2025, Uniview / UNV has removed from their EZCloud US servers all devices identified as "grey market" products—specifically, units that were not intended for the North American market but were nonetheless registered and activated ...
Ecolink TX-E231 Back Tamper
Please note that the TX-E231 has a sensitive back tamper switch that requires the sensor to be mounted firmly to a flat surface. Tape mounting or uneven surfaces can in some cases cause tamper alarms so for this reason we DO NOT recommend tape ...
Ecolink GDZW7 ZWave Garage Door Controller Secure+ Compatibility
The Ecolink GDZW7 ZWave garage door controller is compatible with most garage door openers including Security+ 1.0 models. However some of the newest Security+ 2.0 are not currently compatible due to a change in encryption so at this time we do not ...
Adding Additional Wired Sirens to Alarm System like DSC Powerseries, Neo, Concord
Typically, wired security alarm systems have a siren output, otherwise known as bell output that is meant to drive ONE 12vdc siren or siren/strobe combination. This 12vdc output can handle a maximum output current, so any connected siren(s) and/or ...