Adding a wired siren to Simon XT and Xti
To use a wired siren with a Simon XT or XTi system:
Negative wire from the siren to the HW1- on the panel.
Positive wire to the + HW 1&2 DC out.
You will also need to program the panel to tell it you have a siren tied in to the panel:
Go to program, System, HW Func. Set it to Ext Siren profile.
Related Articles
Wiring Simon XT To Telephone Line
The manual for the Simon XT suggests that there is a cord in the box that can be used to connect the Simon XT to your house phone jack. There is a cord but in reality most people have a standard RJ11 jack and not an RJ45 jack for their phone ...
GE Simon XT Self Monitoring Set-Up
Ensure that phone line is connected to the larger jack on back of the Simon XT Ensure that the phone service type is not VOIP, which may not be compatible with the Simon XT dialer Enter in the appropriate telephone number(s) to call including area ...
GE Interlogix Simon XT V2 Installer and User Manual
Simon XT Installation and Programming manual, and user manuals. For V2 versions of panel shipping since Sept 2010
My Alarm System Siren Is Going Off And I Don't Have The Code, How Do I Stop It
We get this... a LOT. Your alarm system is beeping or the siren is going off and you just bought the house or don't have the code. The following information is provided as-is and without warranty and we do not accept any responsibility for anything ...
Error Or Warning Adding ZWave Lock
When adding a Kwikset, Schlage, Yale or other brand of Zwave lock to the ZWave system, it is best to have it within 2 feet of the ZWave adapter/controller and system and let the software add the module. When ZWave locks are initially enrolled there ...