Aeotec ZW100 Temperature Reporting

Aeotec ZW100 Temperature Reporting

By default, ZW100 reports in F and the automation controller will convert to C if necessary.

    • Related Articles

    • Aeotec / Aeon Labs Support

      Aeon Labs / Aeotec maintain a support site including a ticketing system for technical help, and a knowledgebase, found here: https://aeotec.freshdesk.com    
    • 2441TH Temperature Calibration

      Although the temperature readings from the factory are normally accurate, if you find your thermostat is not reading the correct ambient room temperature, please follow this guide or check the user manual. Make sure the hole in the wall through which ...
    • Remote Temperature Control and Monitoring

      I have a cottage and want to be able to turn up the heat when I'm en-route and turn it back down when I'm not at the cottage.  Most of our Aube thermostats support a phone controller option so you can call in, enter your password and turn the heat up ...
    • Average temperature reading on OMNIstat2

      The average temp function will only work when you have either 1 or 4 units, it will not work if there are 2 units or 3 units. Also this function will only work for items 23A00-1 & 23A00-2
    • DSC Neo HS2016 HS2032 HS2064 Manual

      See attached files for DSC Neo Installation manual and reference manual for HS2016 H2032 HS2064 alarm systems.