Changing 2486DWH6 to 2486DWH8

Changing 2486DWH6 to 2486DWH8

You can change a 2486DWH6 in to a 2486DWH8, or vice verse, by replacing the front cover plate with a new 6 or 8 button plate and reprogram it. 

Changing to 6-Button Configuration

  • Replace the 8-button plate with the 6-button plate - Attach the change-out plate to the switch body by aligning the tabs and snapping into place
  • Gently pull the Set button out as far as it will go
  • Wait 10 seconds
  • While simultaneously holding the On and Off buttons, carefully push the Set button back in, flush with the trim frame
  • Once the Set button is pushed in, continue holding the On and Off buttons for 3 seconds, and then release KeypadLinc will (Beep) KeypadLinc is now in 6 Button Mode


Changing to 8-Button Configuration

  • Replace the 6-button plate with the 8-button plate - Attach the change-out plate to the switch body by aligning the tabs and snapping into place
  • Gently pull the Set button out as far as it will go
  • Wait 10 seconds
  • While simultaneously holding the On/Off (upper left-most) button and the H button, carefully press the Set button back in flush with the trim frame
  • Once the Set button is pushed in, continue holding the On/Off button and H buttons for 3 seconds, and then release KeypadLinc will (Beep) KeypadLinc is now in 8 Button Mode Page

    • Related Articles

    • Changing DSC Alarm System Entry and Exit Delays

      To adjust DSC alarm system entry and exit delays: *8 (installer code) type in 005 for section 5 then 01 for partition 1 then 001 for entry then 001 for exit Then ## to exit 1 minute is the lowest delay.

    • Ezlo API Documentation

      Ezlo has an API that can be used to communicate with PlugHub, EzloPlus, EzloSecure hubs via their platform. You can find more information and a discussion here: https://community.getvera.com/t/pre-alpha-ezlo-api-testing-tool/212617 ...

    • DSC Neo HS2016 HS2032 HS2064 Manual

      See attached files for DSC Neo Installation manual and reference manual for HS2016 H2032 HS2064 alarm systems.

    • Foscam Responds To Security Vulnerability

      Foscam hs released the following statement about a security vulnerability reported on some news channels.  Please read carefully to ensure your Foscam camera has been set up securely to prevent outside evesdropping.     Foscam thank all the people ...