Channel Vision ABus Keypad With 40w Amp or Multiple Speaker Pairs

Channel Vision ABus Keypad With 40w Amp or Multiple Speaker Pairs

 

Normally A-Bus systems have a single pair of speakers connected to the Abus keypad which has a built-in low power amplifier.  In the case where higher output power is needed, or if more than one set of speakers need to be driven from a single keypad, the channel vision A0302 and A0240 can be used.  The keypad connects to the a0302 which in turn connects to the A0240 Amp.  The amplified line then goes back through the keypad and to the speakers.

 

Abus Multiple Speakers From Keypad

    • Related Articles

    • Problem with DSC Keypad Power or Devices Won't Power

      Keep in mind that DSC Powerseries wired alarms can provide up to 700mA current to connected devices.  While this is typically sufficient for multiple keypads and zone expanders, it is important to make sure this limit is not exceeded.  The newer LCD ...

    • Reset PK5500/PK5501 and RFK5500/RFK5501 Keypad

      In case you accidentally program the partition or other settings incorrectly in the keypad or you're having trouble getting wireless to work in an RFK series keypad, you can reset the keypad following this procedure: *8 [INSTALLER CODE] 999 *  

    • Enrolling Wireless Sensors on DSC Systems Using RFK5501 Keypad

      How to enroll wireless devices into a DSC alarm system using a PK5501 or RFK5501 keypad by manually entering the device ESN. Enter [ ✱ ][8][Installer Code][804].   01 for Zone 1 02 Zone 2 and so on Enter in 6 digit ESN number then hit # twice Enter ...

    • AC Power Indicator Is Not Lighting Up on DSC Keypad

      By default the AC status indicator does not light up on DSC keypads. There is an option in programming to turn it on if desired. The option is shown in the installation manual that comes with the keypad (not the system) but in brief: Enter ...

    • What Does The Yellow Trouble Light On My DSC Keypad Mean and How Can I Stop The Beeping?

      What Does The Yellow Trouble Light On My DSC Keypad Mean? The yellow trouble light indicates a system problem of some sort.  To find out the cause of the trouble light, press *2 on your keypad.  On a LCD keypad: 1 is a system problem, press 1 again ...