Enrolling Wireless Sensors on DSC Systems Using RFK5501 Keypad

Enrolling Wireless Sensors on DSC Systems Using RFK5501 Keypad

How to enroll wireless devices into a DSC alarm system using a PK5501 or RFK5501 keypad by manually entering the device ESN.

  1. Enter [ ✱ ][8][Installer Code][804].  
  2. 01 for Zone 1 02 Zone 2 and so on
  3. Enter in 6 digit ESN number then hit # twice
  4. Enter 01 enter in all your zone definitions then # once
  5. Section 101 for zone 1 102 for zone 2 and so on and press number 8 on the keypad to enable wireless device for each zone needed
  6.  ## to exit programming

NOTE: Only one device may be enrolled in each zone. If a zone already has a device enrolled, press [*] to overwrite the zone or [#] to enter
another zone number.  Default installer code is 5555

If the ESN contains a LETTER use the following sequence to represent that letter

HEX [A] enter [*][1][*]
HEX [B] enter [*][2][*]
HEX [C] enter [*][3][*]
HEX [D] enter [*][4][*]
HEX [E] enter [*][5][*]
HEX [F] enter [*][6][*]


    • Related Articles

    • Enrolling DSC Wireless Sensors on RFK5500

        Note: Default installer code is 5555 1. Enter [ ✱ ][8][Installer Code][898]. The LCD displays the following: “Wireless Enrollment Mode.” 2. Place the wireless device in the desired location. 3. Activate the device as described in the associated ...

    • UNO Hybrid Expansion Options using Eyezon/Connect2Go and DSC

      The new UNO hybrid alarm, AKA UNO864 or UNO-CG or UNO-IP - all the same board - can accept a huge range of wired and wireless expansion. Here are the general guidelines for wired and wireless zone expansion using DSC, SOLO and UNO expanders / ...

    • Connect 120V wired smoke detectors to security alarm system like DSC, Vista, Concord

      We are often asked how to add 120V wired smoke detectors to a low voltage security alarm system like DSC, Vista, Concord or Elk. First we need to point out that smoke detectors are a life safety product and so it's critical that you read and ...

    • DSC Neo HS2016 HS2032 HS2064 Manual

      See attached files for DSC Neo Installation manual and reference manual for HS2016 H2032 HS2064 alarm systems.

    • Enrolling Wireless Key Fobs To DSC RFK5500/RFK5501 Keypads

      Wireless keyfobs need to be enrolled in slots 41 through 56 with the first key in 41, second key in 42, etc. So to register the first key fob: *8 Installer's Code 804 41 XXXXXX   (the Electronic Serial Number of fob #1) ## If the fob does not ...