Factory Reset Insteon Switches

Factory Reset Insteon Switches

Pull the set button out completely, let it stay out for 10 seconds.
Push it back in PAST THE NORMAL POINT, all the way in and hold it for about 5 seconds or so until you hear a beep.
If you don't hear a beep after 7 or 8 seconds let go.
It should stay looking dead for a couple seconds while it resets.
This is best done with a small screwdriver - fingernails probably won't work for this process.

    • Related Articles

    • Insteon Hub Not Working - Red Light - Won't Connect

      The Insteon Hub requires a cloud connection Insteon's servers in order to function.  Unfortunately it appears that the Insteon Servers that power the Insteon Hub have gone offline.  Without the cloud connection you are likely seeing a red light on ...
    • Insteon Warranty

      At time of writing, we haven't had any communication whatsoever from Insteon, Smarthome or SmartLabs in some time but according to the smart home community it's likely that Insteon may have shut down.  The Insteon Hub servers and Insteon Forums have ...
    • How to factory reset the Hubitat-C7 Z-wave hub

      Be aware that factory/full resetting will do the following:  "Zigbee and Z-Wave radios will be reset. All files on the hub will be deleted and if a restore from backup is attempted, Zigbee and Z-Wave devices will not work anymore without reset and ...
    • Factory Reset DSC PC1616 / PC1832 / PC1864

      If you have lost or forgotten your installer code for Powerseries (PC1616/PC1832/PC1864) and need to make changes to the system programming you will need to factory reset the panel which will remove/reset ALL programming and should also reset the ...
    • Reset Hikvision Password

      If you are the owner of a Hikvision DVR or NVR and forgot your password, you will need to have your password reset, you can use this form for Canadian customers: https://www.hikvision.com/ca-en/support/password-reset/ You will also need to have ...