ISY994 Message: Cannot Determine Insteon Engine

ISY994 Message: Cannot Determine Insteon Engine

If you are trying to link a new device to the ISY994 and get a message 'Cannot Determine Insteon Engine' or similar, please check the firmware on your ISY994 to ensure it is the most current.  You can find the most current firmware on the Universal Device's forums here.  If in doubt about device support you can also contact Universal Devices' tech support to verify if you need to update your firmware or check your log files to determine the issue.

This message could also be caused by communication issues so you may wish to try moving the device to another location to see if there is any change.

For diagnostics, you can follow the procedure below with your ISY.

When learning the device, open the event viewer. tools>diagnostics>event viewer and then set to level 3
You should see this in the viewer:

Inst TX
Inst RX
Inst SRX

If you don't see INST SRX after the first two then the device trying to be learned in isn't responding which results in a can't determine engine notice

 

    • Related Articles

    • ISY994 Message: Cannot Determine Insteon Engine

      If you are trying to link a new device to the ISY994 and get a message 'Cannot Determine Insteon Engine' or similar, please check the firmware on your ISY994 to ensure it is the most current.  You can find the most current firmware on the Universal ...

    • Insteon i3 Device Support with Insteon and UDI ISY994 / EISY Hubs

      Insteon is now shipping i3 devices. These i3 devices can be used with other Insteon devices or with smart hubs. The Insteon Hub supports the i3 devices natively. Universal Devices ISY994 hubs are end of life and no new features or devices support are ...

    • Insteon Warranty

      At time of writing, we haven't had any communication whatsoever from Insteon, Smarthome or SmartLabs in some time but according to the smart home community it's likely that Insteon may have shut down.  The Insteon Hub servers and Insteon Forums have ...

    • Insteon Hub Not Working - Red Light - Won't Connect

      The Insteon Hub requires a cloud connection Insteon's servers in order to function.  Unfortunately it appears that the Insteon Servers that power the Insteon Hub have gone offline.  Without the cloud connection you are likely seeing a red light on ...

    • ISY Operating in SAFE MODE

      If you get a message from the ISY console that it is operating in safe mode, this means it is having trouble communicating with the PLM.  Please ensure that the PLM and ISY are powered up and obverve the status LED on both.  If this seems normal, ...