Aartech Canada

            Manual Port Forwarding For Uniview NVR Browser Access Without UPNP

            Normally Uniview NVRs are remotely accessed via the cloud using a smart phone app.  This doesn't require port forwarding.  However remote web browser access does require certain ports to be forwarded.  If you have UPNP turned on in your router, the ports should automatically forward.  If this doesn't work or you don't have UPNP enabled, please make sure the following ports are forwarded through your router, to the IP address of your NVR.  You should also make sure your NVR has been assigned a static IP internally.

             

            SDK port 6060
            Media port 7070
            HTTP port 80
            HTTPS port 443
            RTSP port 554

            These are the default ports so if it does not work please make sure they have not been changed.  Or if you find that prot 80 or 443 are blocked you may need to use a different port externally if your router allows it, or change the ports in your NVR setup.

            Updated: 14 Aug 2019 06:57 AM
            Helpful?  
            Help us to make this article better
            0 0