SmartLinc 2412N Time

SmartLinc 2412N Time

If you are finding that the SmartLinc 2412N is losing time or not keeping exact time, please refer to the following articles that users have submitted as a way around the issue as there is currently no support for an Internet time sync in this product.

http://www.smarthome.com/forum/topic.asp?TOPIC_ID=6597

http://home.comcast.net/~andyf0/UpdateSLC.htm

 

 

    • Related Articles

    • Controlling X10 From 2412N SmartLinc

      The 2412N SmartLinc was designed as a simple Insteon controller with some support for X10.  It has basic manual control of X10 devices by using the X10 control page (click the wrench Icon, look for ‘Open X10 Controller’).  It does not have a simple ...

    • Setting The Time On DSC Alarm Systems

      Please see the pdf attachment listed below, for instructions to set the time on various DSC alarm panels. For the current Powerseries PC1616/PC1832/PC1864, Alexor and 9047 alarm systems, follow these instructions: Step 1 – Enter time/date programming ...

    • 2412N With Blackberry

      While there is no official blackberry application for the 2412N, it is possible to access the 2412N using the Blackberry browser using the following procedure: 1. Log onto http://smartlinc.smarthome.com/. 2. Enter “hindex.htm” on the end of the ...

    • Insteon Warranty

      At time of writing, we haven't had any communication whatsoever from Insteon, Smarthome or SmartLabs in some time but according to the smart home community it's likely that Insteon may have shut down.  The Insteon Hub servers and Insteon Forums have ...

    • Homeseer WX300 Support in Hubitat

      While the WX300 switch/dimmer from Homeseer should "work" out of the box as a generic device, in order to take advantage of more features a driver will be required.  At time of writing, there is a community driver now available: ...