TH135-1 Relay Always Closed

TH135-1 Relay Always Closed

The TH135 relay latches in the last position in order to conserve battery power.  If the relay is closed when installing it will still open when commanded.

    • Related Articles

    • Wiring RC840T-120 Relay

      The Aube / Honeywell RC840T-120 relay provides two functions: Provide 24VAC power on the C and W terminals to power a low voltage thermosat Switch the 120V circuit when triggered by the low voltage R & W terminals Take care to ensure you are not ...

    • Do Alarm Systems Require Normally Open Or Normally Closed Sensors

      Alarm systems are designed to use 'open loop' burglary sensors.  While they are called 'open loop', they are actually 'normally closed' when the magnet is near the sensor or in other words the zone is 'safe.  Motion, glass break and other burglary ...

    • Connect 120V wired smoke detectors to security alarm system like DSC, Vista, Concord

      We are often asked how to add 120V wired smoke detectors to a low voltage security alarm system like DSC, Vista, Concord or Elk. First we need to point out that smoke detectors are a life safety product and so it's critical that you read and ...

    • DSC Powerseries PC1616/PC1832/PC1864 EOL Resistors vs Closed Loop Programming

      By default, DSC Powerseries wired panels are expecting each zone to have EOL resistors installed.  If you are not going to use EOL resitors, you will need to turn Section 013 Option 1 to ON otherwise your zones will show open.  After you exit ...

    • EOL End of Line Resistors

      Security systems and fire alarm panels use end of line resistors in order to supervise the alarm/fire zone.  This means the alarm/fire panel can detect a problem like a short circuit where someone may have tampered with the zone or lets say a nail ...