WTK5504, WTK5504P Won't Enrol

WTK5504, WTK5504P Won't Enrol

If you're having issues enrolling a new WTK5504 or WTK5504P keypad in your DSC powerseries system, try a manual enrol:

 

On the keypad, after a power cycle, press both the minutes, and the seconds on the keypad at the same time.
This will force a manual enroll.

    • Related Articles

    • Leviton WIFI Switches and Dimmers, What if Internet Connection Goes Down

      Q: Leviton's Decora Smart WIFI switches and dimmers use the Internet and Leviton's private cloud servers for set up and operation.  What happens if the Internet connection in the house goes down?   A: Switches will still work manually Timers will ...

    • Yale ZWave Installation and Instructional Videos

      Visit Yale' https://www.yalehome.com/en/support/

    • Shelly Cloud Crestron Drivers

      Shelly Cloud devices can work with Crestron systems by using drivers such as these from Wired Media Solutions: https://chdrivers.com/products/crestron-home-shelly-iot-driver Supported Shelly Modules Shelly 1 Shelly 1 PM Shelly 1 L Shelly 2.5 (When ...

    • Expanding Security Alarm System Power Supply

      Wired Security systems (eg DSC, Elk) are powered by an external power supply, and then in turn they supply power to 12VDC peripherals such as keypads, zone expanders, motion sensors, glass breaks, smoke detectors. This auxiliary power from the panel ...

    • Homeseer WX300 Support in Hubitat

      While the WX300 switch/dimmer from Homeseer should "work" out of the box as a generic device, in order to take advantage of more features a driver will be required.  At time of writing, there is a community driver now available: ...