Viewing humidity levels on OMNIstat2 using 31A00-8 Outdoor Temp/Humidity sensor

Viewing humidity levels on OMNIstat2 using 31A00-8 Outdoor Temp/Humidity sensor

Unfortunately the humidity levels cannot be viewed on the thermostat, you can only view it on the Leviton app or the touchscreen (99A00-1 or 99A00-2).

    • Related Articles

    • Using a Web Browser to View Cameras

      All of the major camera brands like Hikvision, Dahua, Uniview UNV, WatchNET, Acti, etc, stopped supporting browser viewing back when Internet Explorer was still available. The plug-in style that was needed simply didn't work any more in Chrome, ...
    • System Sensor 2012J Manufacture Date and Warranty

      While the System Sensor 2012J (2012JA) smoke detectors carry a 3 year manufacturer's warranty from the date of manufacture. While the warranty may expire, as per the user manual, users should aim to replace them after 10 years of use. This is true of ...
    • Installing an Overhead Door Sensor

      The security of garage doors and commercial overhead doors for warehouses, logistics, distribution centers is accomplished with an overhead door sensor or garage door sensor.  We're often asked what to buy and where to install it and while this is ...
    • Uniview Waterproof RJ45 Boot and Installation Instructions for Outdoor Exposed Installations

      Uniview outdoor rated IP cameras come with a waterproof "boot" in the box. If the cable connection is exposed rather than enclosed in a sealed junction box or in the wall, this boot must be installed correctly to ensure water cannot infiltrate the ...
    • HDCVI over CAT5 or CAT6 using Baluns

      It has been common practice for several  years, to use BALUNS to run analog camera feeds over CAT5, CAT5e or CAT6 cable.  With the introduction of AHD, HDCVI, and other high definition over coax products, it is advisable to use a Balun specifically ...