Aeotec ZW100 Temperature Reporting
By default, ZW100 reports in F and the automation controller will convert to C if necessary.
Related Articles
Aeotec SmartThings Smart Home Hub vs Smart Home Hub 2: Comparison Guide
Aeotec Smart Home Hub (GP-AEOHUBV3US) The Aeotec SmartThings Smart Home Hub integrates a variety of smart devices through the SmartThings ecosystem, supporting Z-Wave, Zigbee 3.0, Wi-Fi, Matter and Thread. It serves as the central hub for managing ...
33-504 Error - SmartThings Hub
Overview When encountering the 33-504 error while claiming a SmartThings Hub 2018 (IM6001-V3P) or an Aeotec SmartThings Hub, the following root causes may apply: Your hub cannot access the internet over Ethernet or Wi-Fi connections Hubs manufactured ...
Aeotec / Aeon Labs Support
Aeon Labs / Aeotec maintain a support site including a ticketing system for technical help, and a knowledgebase, found here: https://aeotec.freshdesk.com
2441TH Temperature Calibration
Although the temperature readings from the factory are normally accurate, if you find your thermostat is not reading the correct ambient room temperature, please follow this guide or check the user manual. Make sure the hole in the wall through which ...
Remote Temperature Control and Monitoring
I have a cottage and want to be able to turn up the heat when I'm en-route and turn it back down when I'm not at the cottage. Most of our Aube thermostats support a phone controller option so you can call in, enter your password and turn the heat up ...