Can't Change House/Unit code on KR19A Keychain Remote

Can't Change House/Unit code on KR19A Keychain Remote

X10 has been shipping two different versions of the KR19A.  One uses the standard programming methods, and the 2nd uses different programming method outlined below.  Otherwise both remotes function the same.

To change the Housecode

Press and hold the first (top) ON and OFF buttons at the same time for 2-3 seconds to enter Program Mode (the LED stays on).
- Press and release the first (top) ON button the appropriate number of times for the Housecode you want to set. Once for A, twice for B, etc. The LED blinks off for each press.
- Press the second (bottom) ON or OFF button to return to Normal Mode. The unit will also return to Normal Mode if no keys are pressed for more than 30 seconds.


To change the Unit Code for the first (top) two buttons (the second pair of buttons are always one # higher than the first pair, i.e. if you set the first button to 6, the second button controls 7, etc.).

- Press and hold the first (top) ON and OFF buttons at the same time for 2-3 seconds to enter Program Mode (the LED stays on).
- Press and release the first (top) OFF button the appropriate number of times for the Unit Code you want to set. Once for 1, twice for 2, etc. The LED blinks off for each press.
- Press the second (bottom) ON or OFF button to return to Normal Mode. The unit will also return to Normal Mode if no keys are pressed for more than 30 seconds.

    • Related Articles

    • Remote Management of Door Lock Codes with Hubitat

      Hubitat users can add or remove PIN codes for door locks using the web interface.  For remote management of lock codes, we recommend the optional (paid) Remote Admin Service.  Advanced users may wish to set up a vpn for remote access to their Hubitat ...

    • Remote Management of Door Lock User Codes with EzloPlus or EzloSecure

      EzloPlus and EzloSecure users can remotely add, remove or manage user PIN codes for door locks using the Vera app.  Users can set schedules for access as well.  The app is cloud based so this makes it easy to manage door lock codes from anywhere the ...

    • Setting up Paxton Net2Online for Remote Management of Net2Plus

      Net2Online provides simple remote connection to manage Net2Plus systems by web browser or app over an Internet connection.  The building must have an available Internet connection and the Net2 Pro software must be current.   No port forwarding ...

    • My Alarm System Siren Is Going Off And I Don't Have The Code, How Do I Stop It

      We get this... a LOT.  Your alarm system is beeping or the siren is going off and you just bought the house or don't have the code. The following information is provided as-is and without warranty and we do not accept any responsibility for anything ...

    • Change to ISY99 / ISY994 Weatherbug Module

      As for May 31, 2014, UDI has been forced to change weather providers for the 'Weatherbug' plug-in.  For current ISY994 users who have already purchased the weather module, UDI plans to offer a free upgrade to a new plug-in and service.  It will ...