Remote Management of Door Lock Codes with Hubitat
Hubitat users can add or remove PIN codes for door locks using the web interface. For remote management of lock codes, we recommend the optional (paid) Remote Admin Service. Advanced users may wish to set up a vpn for remote access to their Hubitat smart home controller.
With Remote Admin, customers have complete
access to all admin functions remotely, including apps and devices so
they are able to remotely change door lock codes. This can be accomplished by adding the free Lock Code Manager app from Hubitat. User codes be set to be "always enabled", or they can be set to enable or disable by date. For information on using Lock Code Manager, click here
There is also a
way to remotely change door lock codes using Maker API if for programmers who may have their own app or integration needs.
Remote Management of Door Lock User Codes with EzloPlus or EzloSecure
EzloPlus and EzloSecure users can remotely add, remove or manage user PIN codes for door locks using the Vera app. Users can set schedules for access as well. The app is cloud based so this makes it easy to manage door lock codes from anywhere the ...
Setting up Paxton Net2Online for Remote Management of Net2Plus
Net2Online provides simple remote connection to manage Net2Plus systems by web browser or app over an Internet connection. The building must have an available Internet connection and the Net2 Pro software must be current. No port forwarding ...
Yale lock is locking backwards
The Yale Real Living lock will automatically determine whether it will function as a right or left-handed lock. (The "hand" or "handing" of the lock, is determined by the side of the entry door that the hinges are on when standing outside the door). ...
Homeseer WX300 Support in Hubitat
While the WX300 switch/dimmer from Homeseer should "work" out of the box as a generic device, in order to take advantage of more features a driver will be required. At time of writing, there is a community driver now available: ...
Add a Weiser lock to a SmartThings Hub
Steps to add a Weiser lock to a SmartThings Hub: I factory reset the lock by following the manufacturer’s instructions: Remove the battery pack from the lock Press and HOLD the Program button while reinserting the battery pack. Keep holding the ...