Defective COS2010 Replacement

Defective COS2010 Replacement

> I have an old model American Sensors, I want to confirm that it is the
> COS2010 and that the replacement is the SC9120BA acording to your link:
> http://www.aartech.ca/page/cos2010-sa360
>

Please refer to the following page:

http://www.aartech.ca/page/cos2010-sa360


BRK SC9120BA is a direct replacement for model COS1010 from American Sensors.

As per the page mentioned, the SC9120BA comes with a new mounting bracket and new wiring harness that will need to be installed.
The SC9120A is compatible with other American Sensors and BRK smoke and CO detectors.  Here is a video showing the replacement procedure.

 

    • Related Articles

    • DSC Meridian MN140 or MN140C Smoke Detector Alternative Replacement

      The DSC 'Meridian' MN140 series smoke detector was a 4 wire smoke detector that was discontinued many years ago. DSC no longer makes wired smoke detectors so another brand will need to be used to replace a failed unit. The System Sensor 2012JA is one ...

    • Dicon American Sensors SA360 Replacement

      Dicon (American Sensors) SA360 has been discontinued with no direct wire replacement. You can replace your SA360 (in Canada) with 9120A or 9120BA from BRK which is made by the same factory and is cross listed as compatible.. You should replace all ...

    • Smoke Detector Replacement Date Showing Too Early

      From BRK Canada, the manufacturer for First Alert, BRK and American Sensors: The reason we suggest alarms be replaced every 10 years (CO 5 yrs) are environmental.  Studies show they operate less effectively after 10 years from being exposed to dust, ...

    • Replacement for Visonic WR200, WR300, WT101, WT102, WT104

      WR200 and WR300 receivers has been replaced by MCR-304 (1 channel) and MCR-308 (4 channel) receivers. WT101, WT102, WT104 have been replaced by MCT-101, MCT-102, MCT-104 (1,2, 4 button) transmitters. http://www.aartech.ca/visonic-wireless The new and ...

    • Replacement for Visonic WT101, WT102, WT104, WR200

      After over 10 years of supporting the older series, Visonic has discontinued the WT101, WT102, WT104 transmitters and WR200 receiver series.  The new models are MCT-101, MCT-102, MCT-104.  Unfortunately they use a new, encrypted signal so the older ...