Visonic has discontinued their very popular remotes MCT-101, MCT-102, MCT-104
There is no direct replacement. You would need to purchase the new version MCT-101, MCT-102 or MCT-104 and also a new receiver MCR-304 or MCR-308 as well. The old remote(s) do not work on the new receiver and the new remotes don't work on the old one. This was Visonic's decision to move to a more secure wireless protocol after many years.
Related Articles
Replacement for Visonic WT101, WT102, WT104, WR200
After over 10 years of supporting the older series, Visonic has discontinued the WT101, WT102, WT104 transmitters and WR200 receiver series. The new models are MCT-101, MCT-102, MCT-104. Unfortunately they use a new, encrypted signal so the older ...
Replacement for Visonic WR200, WR300, WT101, WT102, WT104
WR200 and WR300 receivers has been replaced by MCR-304 (1 channel) and MCR-308 (4 channel) receivers. WT101, WT102, WT104 have been replaced by MCT-101, MCT-102, MCT-104 (1,2, 4 button) transmitters. http://www.aartech.ca/visonic-wireless The new and ...
Setting Up Visonic PowerLinc Camera
Please follow the following steps to configure your power link with any of the Visonic IP Cameras. Visionic Powerlink Setup & IP cam The IP cam virtually had no setup required. Once you have the Powerlink working and setup correctly, as soon as you ...
Powermax Programming Software
Click Here to download the Visonic Powermax Remote Programming Software Link from our download section.
Amber Select Software
The programming software for Amber Select can be downloaded from Visonic's FTP site as follows: ftp://ftp.visonic.com username: amber password: software Login for software: Operator: HHCPC Password: HHC