Baseboard Thermostat Automation

120V - 240V (Baseboard) Heating with Insteon, WIFI, Zwave Thermostats

Most manufacturers of automation products have traditionally focused on traditional forced air heating and cooling systems, leaving 120V and 240V heating out of the smart home ecosystem. 

However that has changed somewhat with the release of WiFi Baseboard Thermostats, ZWave Baseboard Thermostats and Zigbee Baseboard thermostats. 

The other approach is to use a thermostat relay on the output of a low voltage thermostat, that can switch the high voltage load.  The relay can be installed near the thermostat if the high voltage wiring is already in this location and there is room for it - or it can be installed at the baseboard as they normally have a cover inside which it can fit.  Just make sure to use one of the smaller relays if you are trying to fit in to a smaller space. We have Aube relays on our site for this purpose but you need to verify the voltage and current load to confirm which is suitable and we suggest working with an electrician to ensure everything is installed safely and to code. You would also need a 24VAC power supply to power the low voltage thermostat. This can sometimes be brought off the same relay, or use a separate plug in power supply like TP2024 for example.


Relays can be found here: http://www.aartech.ca/thermostat-relays
Power supply can be found here: http://www.aartech.ca/tp2024-ne-plug-in-ac-adapter-24vac-20va.html


    • Related Articles

    • Which Smart Hub Supports Both Insteon and ZWave

      Insteon makes arguably the best smart home lighting system with respect to flexibility, scene lighting and fast response time.  It has the most flexible in wall scene controllers as well.  At the same time there are no Insteon locks and only one ...

    • Insteon Hub and Device Alternatives

      Insteon users are no doubt frustrated by what has been a total lack of communication from SmartLabs, Smart Home or Insteon in the past several months.  At time of writing we haven't had any updates from the vendor but looking at forum posts and ...

    • ISY994 Zwave Support

      Users of the ISY994 series of automation controllers (ISY994i, ISY994iR, ISY994iRPro) can add a Zwave module to their ISY to support both Insteon and ZWave.  In addition to the ZWave module, a software plug-in needs to be purchased (one time nominal ...

    • What are options for INSTEON hub without subscription fee?

      Now that Insteon is charging an annual fee for the Insteon Hub cloud service, some customers are looking for other options. Unfortunately the fact is that running a cloud service is very expensive so it's not practical for most companies to offer ...

    • Is there a hardwired z-wave smoke detector? New house smoke detectors need to be hardwired for code

      At time of writing there are no wired Zwave smoke detectors available but there are two options to add Z-Wave smoke detection.  In fact most new homes need to meet an array of requirements that may include using smoke/CO combination detectors, having ...