ELK-SS15 Wiring

ELK-SS15 Wiring

White = Negative
Red = +12 VDC Yelp
Yellow = +12 VDC Steady Siren

Do not connect both Red and Yellow to power simultaneously or you will damage the siren.

    • Related Articles

    • Elk Webinar Product Information & Training Sessions

      Elk has recorded hours of webinar training sessions and instructional videos that cover hardware, product information, integration and programming.  You can visit their Youtube channel:  Elk Webinar Recordings.
    • Elk M1 Gold to Hubitat Integration

      There is community written code written for Hubitat that allows it to communicate with an Elk M1 Gold with M1XEP Ethernet interface installed.  The integration allows Hubitat to "see" arming state, zones, outputs, keypads.  It also allows Hubitat to ...
    • Wiring / Connecting 2 Wire and 4 Wire Smoke Detectors to an Alarm System

      We are often asked how to connect low voltage smoke detectors to a wired alarm system.  First we need to point out that smoke detectors are a life safety product and so it's critical that you read and understand how the connection should work, and ...
    • DSC RM-1 Wiring

      As of the time of writing (Aug 27th 2010) the RM-1 wiring is as follows: Black - negative coil Red - positive coil White - common Yellow - normally closed Green - Normally Open
    • Insteon with Aluminum Wiring

      Aluminum wiring is less conductive then copper so the INSTEON signal may be slightly affected by that but the signal can go a long way on the powerline so the aluminum wiring does not have a major effect in a residential home.  Where it can be ...