GD00Z-8 ZWave Garage Door Controller supported by Hubitat C7
Previously the GD00Z-8 would need to be enrolled in Hubitat as a generic device only - however it now has a built-in driver in Hubitat C-7 which also supports S2 security. Please make sure that driver is selected when the device is added. S2 security is only supported on C-7 hubs.
Related Articles
Remote Management of Door Lock Codes with Hubitat
Hubitat users can add or remove PIN codes for door locks using the web interface. For remote management of lock codes, we recommend the optional (paid) Remote Admin Service. Advanced users may wish to set up a vpn for remote access to their Hubitat ...
How to factory reset the Hubitat-C7 Z-wave hub
Be aware that factory/full resetting will do the following: "Zigbee and Z-Wave radios will be reset. All files on the hub will be deleted and if a restore from backup is attempted, Zigbee and Z-Wave devices will not work anymore without reset and ...
Homeseer WX300 Support in Hubitat
While the WX300 switch/dimmer from Homeseer should "work" out of the box as a generic device, in order to take advantage of more features a driver will be required. At time of writing, there is a community driver now available: ...
Elk M1 Gold to Hubitat Integration
There is community written code written for Hubitat that allows it to communicate with an Elk M1 Gold with M1XEP Ethernet interface installed. The integration allows Hubitat to "see" arming state, zones, outputs, keypads. It also allows Hubitat to ...
Insteon Garage Door Opener Compatibility
> I am interested in buying the INSTEON Garage Door Control and Status Kit below. > Do you know if it is compatible to work with my garage door opener ? > Hello, We don't really have any way of cross referencing this kit with various garage door ...