Setting The Time On DSC Alarm Systems
Please see the pdf attachment listed below, for instructions to set the time on various DSC alarm panels.
For the current Powerseries PC1616/PC1832/PC1864, Alexor and 9047 alarm systems, follow these instructions:
Step 1 – Enter time/date programming by pressing [*][6] + [Master Code] + [1]
Step 2 – Enter [HH:MM] [MM/DD/YY]
Step 3 – Press [#] to exit
Note: Program the time using military standard (e.g. 8:00 pm = 20:00 hours). Master code is the Master User code (not installer code)
Related Articles
EVL4 Universal Monitoring and Control of DSC Neo and Other Security Alarm Systems
Since DSC Powerseries was discontinued and replaced by Neo alarm system panels, we have been asked if the EVL4 card is compatible for self monitoring or pro monitoring through the EyezOn or Connect2Go service and apps. As of writing the EVL4 is not ...
Connect 120V wired smoke detectors to security alarm system like DSC, Vista, Concord
We are often asked how to add 120V wired smoke detectors to a low voltage security alarm system like DSC, Vista, Concord or Elk. First we need to point out that smoke detectors are a life safety product and so it's critical that you read and ...
What Alarm Systems Can and Can Not Do With Zwave Devices
As practically all alarm companies are supporting some sort of automation, typically Zwave devices, we are seeing some confusion about compatibility and what Zwave devices may be used. Ultimately, Zwave is an automation protocol and not originally ...
What Alarm Systems Can and Can Not Do With Zwave Devices
As practically all alarm companies are supporting some sort of automation, typically Zwave devices, we are seeing some confusion about compatibility and what Zwave devices may be used. Ultimately, Zwave is an automation protocol and not originally ...
What Alarm Systems Can and Can Not Do With Zwave Devices
As practically all alarm companies are supporting some sort of automation, typically Zwave devices, we are seeing some confusion about compatibility and what Zwave devices may be used. Ultimately, Zwave is an automation protocol and not originally ...