Channel Vision ABus Keypad With 40w Amp or Multiple Speaker Pairs

Channel Vision ABus Keypad With 40w Amp or Multiple Speaker Pairs

 

Normally A-Bus systems have a single pair of speakers connected to the Abus keypad which has a built-in low power amplifier.  In the case where higher output power is needed, or if more than one set of speakers need to be driven from a single keypad, the channel vision A0302 and A0240 can be used.  The keypad connects to the a0302 which in turn connects to the A0240 Amp.  The amplified line then goes back through the keypad and to the speakers.

 

Abus Multiple Speakers From Keypad

    • Related Articles

    • Problem with DSC Keypad Power or Devices Won't Power

      Keep in mind that DSC Powerseries wired alarms can provide up to 700mA current to connected devices.  While this is typically sufficient for multiple keypads and zone expanders, it is important to make sure this limit is not exceeded.  The newer LCD ...

    • Chamberlain LiftMaster 881LM(W) Control Panel - Compatibility Note

      The Liftmaster 881LM(W) motion-detecting control panel is designed for use with any Security +2.0 Garage Door openers. All Security +2.0 Garage Door openers are equipped with a yellow "learn" button. At present, there is a specific exception to this ...

    • Reset PK5500/PK5501 and RFK5500/RFK5501 Keypad

      In case you accidentally program the partition or other settings incorrectly in the keypad or you're having trouble getting wireless to work in an RFK series keypad, you can reset the keypad following this procedure: *8 [INSTALLER CODE] 999 *  

    • Update / Upgrade UNO Touch Screen Keypad

      The UNO touch screen keypad software has gone through many updates as it matures. It's recommended to update to the most current version of the touchscreen app by following the process indicated in their installation guide. It is also copied below: ...

    • Enrolling Wireless Sensors on DSC Systems Using RFK5501 Keypad

      How to enroll wireless devices into a DSC alarm system using a PK5501 or RFK5501 keypad by manually entering the device ESN. Enter [ ✱ ][8][Installer Code][804].   01 for Zone 1 02 Zone 2 and so on Enter in 6 digit ESN number then hit # twice Enter ...