Uniview UNV
Uniview Waterproof RJ45 Boot and Installation Instructions for Outdoor Exposed Installations
Uniview outdoor rated IP cameras come with a waterproof "boot" in the box. If the cable connection is exposed rather than enclosed in a sealed junction box or in the wall, this boot must be installed correctly to ensure water cannot infiltrate the ...
Setting up and Using GMail SMTP Server in 2022 for Uniview and other NVR Systems
Many NVRs including Uniview UNV brand are able to send an email alert to notify the owner of system issues and alerts. The customer must provide an SMTP server for this to work. There are many free and paid SMTP servers and most mail providers ...
Uniview UNV Control4 Integration Driver
There is a Control4 driver for Uniview / UNV cameras and NVRs available from this developer: https://chowmain.software/drivers/control4-uniview It allows integration with cameras on the network (probably best) or with cameras connected to the NVR.
EZCloud Service agreement
Please see the attached file for a copy of the Uniview EZ Cloud Service agreement. 2022-08-04
Uniview accessory guide
This link should take you to the latest accessory guide. 2022. https://www.univiewtechnology.com/wp-content/uploads/2022/07/UVT-Camera-Accessories-Guide_070622_final.pdf
Uniview Mount Guide for IPC3614 IPC3615 IPC3618
Uniview has changed the bolt pattern/size of the IPC361x cameras 3 times which has caused a problem for clients needing to match wall mounts and junction boxes. All new shipments should work with the current UNV Accessory Guide. Please also refer ...
Adding Cameras to NV208-32
Since the NV208 does not have built in POE ports for each camera (there would be too many ports), the NV208 will connect to a POE enabled switch of sufficient size to connect the cameras and NVR. Whereas smaller NVR models will auto configure the ...
Adding More Than 8 Cameras to Uniview NV202-16
The Uniview NV202-16 has 8 POE ports built in for directly connecting Uniview POE cameras. However if more than 8 cameras are connected, see the attached guide for the simplest method which maintains a private LAN for the cameras and NVR. The single ...
Adding Uniview Encoder
Uniview NVRs can accept analog cameras by using a Uniview hardware encoder that converts the analog camera feed to an IP feed. The attached document explains how to set up the Uniview encoder.
Manual Port Forwarding For Uniview NVR Browser Access Without UPNP
Normally Uniview NVRs are remotely accessed via the cloud using a smart phone app. This doesn't require port forwarding. However remote web browser access does require certain ports to be forwarded. If you have UPNP turned on in your router, the ...
Univew IP Camera Default Address
By default, Uniview cameras ship with IP address 192.168.1.13 By default, when a Uniview camera is connected to a Uniview NVR PoE port, the plug and play set up will assign an IP in the range of 172.168.0.x
Uniview Dual or Back Up Recording
In some cases the site owner may wish to have a back up or redundant copy of video rather than having it saved to a single NVR. Generally speaking it is NOT feasible to back up video off site because the amount of data being saved to the NVR is ...
Uniview NVR Browser Access
Please refer to the attached document if you are having any difficulty accessing your Uniview NVR from a Windows or Mac browser. Be sure to check the preferences on your browser and the firmware version of your Uniview NVR. Please contact support ...